Before your first flight, we recommend that you update to the latest firmware. NOTE: If you have purchased a new X‑Star drone after October 1, 2016, your firmware is up to date and your drone is ready to fly. The Starlink app will notify you when a new firmware version is released. Ensure the aircraft battery and remote controller are fully charged. If the battery holds less than a 50% charge, the update may not be able to complete. Power down the remote controller and aircraft.
Download the firmware update from our support site. Insert the provided microSD card into a microSD Card Reader (not provided), and plug it into your computer. Copy the firmware file to the root directory on the microSD card. Power on the remote controller and the aircraft. Watch the LCD display on the remote controller and wait for the remote controller to connect to the aircraft. Insert the microSD card into the camera.
Autel Update Card
Watch the LCD on the remote controller to see the file begin unpacking (which takes 30 to 60 seconds). If unpacking fails, delete the update file from the microSD card and start again at Step 1.
Periodically check the LCD to monitor each component being updated. The update may take up to 30 minutes to complete. After the LCD indicates that each update was successful, power off the aircraft and the remote controller to complete the update. Power back on and you are ready to fly. To retry a firmware update after a failure:.
Software Updates. If you already have. EST201 update pack. MS409 update pack. MS609 update pack. Provide obd scanner knowledge and useful update software.If you need to learn how to fix your car well with the car scanners. How to setup and update Autel AA101? Before your first flight, we recommend that you update to the latest firmware. To perform a firmware update on your X-Star drone.
Autel Software Torrent
Power off the aircraft and remote controller. Remove the microSD card from the camera. Insert the microSD card into the microSD card reader, and plug the card reader into your computer.
On your computer, open the folder for the microSD card reader and locate the update file you previously copied into the root directory. Rename the update file by right-clicking it and selecting Rename. Highlight the “-old” section of the file name, press the delete key, and then press the Enter key. A warning will appear. Click Yes to confirm the name change.